The split solar water heating system is such a system that separates the heat collector from the water tank,and transfers the solar energy collected by the heat collector to the water tank for the hot water through the natural or forced cycle of medium. Himin family split solar water heating system has such merits as large water storage,good heat-collecting effect,long insulation work time, intelligent operation,load-bearing running,and convenient and reliable use. So it is the ideal selection for home hot water scheme.

The characteristics:
1. Special design for luxury villa
Presenting unique charm & spirit of successful person, as well as experiencing worshipful life
2. Pressure hot water, comfort bathing
It applies pressure bearing design, & in case of switch-on, it shall have pressure hot water immediately with strong water outgoing, large water quantity & flow.
3. Collector part module for freely assembly
Modulus collector component constituted by high temperature special effect pipe, & can be freely assembled as per requirements.
4. Intelligent control with complete function
Control system of integration & intelligentization: convenient & quick;
Indicating pressure & multi point water temperature.
5. Diversification of installation position, perfect combination with building
Heat collector shall be suitable for multi building style with diversification of installation position.
6. Separate type installation; simple & convenient.
Heat collector shall be separated with water storage tank, & water tank position shall have no limit.Standard modularization for fast assembly: easy & quick.
7. Use with cooperation of auxiliary energy resource
Auxiliary energy resource interface shall be reserved so as to achieve full day hot water supply with combination of electric energy, fuel oil & gas boiler.

* Heat pipe vacuum tube solar collector

* Wilo hot water pump (RS15/6)

* Three sensors differential controller

* Porcelain enamel pressure storage tank with coil exchanger

* Air Vent

* Electric Booster: 1.5KW

* Expansion tank

* Pressure gauge

* Filling & flushing valve

* P/T valve

* One way valve

* Mag. Anode

* Vacuum valve

Super heat pipe series solar water heaters

Blessingsolar heat pipe has a low thermal capacity, and has rapid heat exchange (it is 1000 times of copper heat exchange speed, so it is an available fast heat exchanger. Heat exchange rate is up to 99%. The startup is fast, collect solar energy fully, at 25℃,5 seconds can startup heat. At the same time, it has heat exchange unilateralism diode function system, for example: heat energy exchange is a direct progress from heat absorber to water. But it will not back up or reversal in the water. Because of matter physics effect in the heat tube and especial construction of condenser, the biggest work temperature of this system will be controlled; this particular characteristic ensures the stability under special conditions.

The solar collector tubes have especially excellent ability of absorbing solar energy, and the high vacuum they had formed can reduce the heat loss to the lowest degree, because the selective coating can transfer the perpendicular incidence radiation and diffuse radiation to the super conducting heat pipes.

The solar collector tubes take on the available absorb solar energy and heat preservation adiabatic function, even if it located in disadvantage condition, it also can arrest drain of heat. The heat pipe takes on the transfer solar energy function rapidly. These optimize combination is superior to any other ones even if it is located in the uncommon conditions.

Performance Parameter: